Heater Craft 200 Series - 200 Elite Unit
The 200 series is made in the USA with durable aluminum construction and powder coated for extra protection against marine environments. When you need reliable equipment for your boating needs, trust HeaterCraft.
Heater Craft AIR "Y" ADAPTERS, 2" and 3"
Heater Craft AIR "Y" ADAPTERS
2" and 3" Air "Y" adapters are used for splitting single vent hose into two. Made of durable black ABS plastic.
"Y" 2" Part#: hc_y_adapters
"Y" 3" Part#: HC_3_Y_Air_Adapter
Heater Craft LOW IDLE WYES ("Y") 1-1/4" x 1-1/4" x 3/4"
Increase your heat while idling!
This fitting relocates the return line for the heater to the inlet side of the raw water pump, increasing water flow thru the heater core at idle speeds. The 1-1/4" barb is for PCM GM, Indmar Ford & GM, and GM Mercruiser engines.
Heater Craft LOW IDLE WYES ("Y") 1-1/4" x 1-1/4" x 5/8"
Increase your heat while idling!
This fitting relocates the return line for the heater to the inlet side of the raw water pump, increasing water flow thru the heater core at idle speeds. The 1-1/4" barb is for PCM GM, Indmar Ford & GM, and GM Mercruiser engines.
Heater Craft LOW IDLE WYES ("Y") 1-1/4" x 1-1/4" x 5/8"
Increase your heat while idling!
This fitting relocates the return line for the heater to the inlet side of the raw water pump, increasing water flow thru the heater core at idle speeds. The 1-1/4" barb is for PCM GM, Indmar Ford & GM, and GM Mercruiser engines.
Kit Includes:
(Qty1) "Y" pipe 1-1/4" x 1-1/4" x 5/8"
(Qty2) Hose Clamp #16
(Qty1) Hose Clamp #8
Heater Craft MARINE 200 WRAPPER
Our Marine Housings are made from durable USA-made aluminum, providing a reliable and long-lasting housing for your boat. This corrosion-resistant metal is ideal for marine use.
200, updated aluminum housings
Heater Craft MARINE 340 WRAPPER
Our Marine Housings are made from durable USA-made aluminum, providing a reliable and long-lasting housing for your boat. This corrosion-resistant metal is ideal for marine use.
340, updated aluminum housings
Heater Craft High - Low Switch. 2-6098
High Low Switch On/Off 2-6098
This Double Bank 2-speed rocker (on/off/on) switch can be wired for High, Low and Off settings and circulation pump without the need of a relay harness.
Used as a non lighted replacement switch for UTV heater kits.
Heater Craft 200 Series - 200 Elite
The 200 series is made in the USA with durable aluminum construction and powder coated for extra protection against marine environments. When you need reliable equipment for your boating needs, trust HeaterCraft.
Heater Kit Includes:
One Heater Unit with wire 6' harness
One High/Low switch
3" Vent hose (6 ft per vent)
One 3" fixed euro vent
One Hot Tube Gen 1
Universal mounting brackets & screws
40 feet of heater hose
One low idle "Y"
One circulation pump with harness and fittings
Low idle "Y" does not come with the Elite Kit
Technical Specifications:
12 Volt
28,000 BTU
12 V Amperage: Three speed blower Low 4.4, Med 5.8, High 8.5
Air flow: Low 230 cfm, Med 248 cfm, High 260 cfm.
Hose barb: 5/8"
Heater Craft 200 Series - 200 PRO
The 200 series is made in the USA with durable aluminum construction and powder coated for extra protection against marine environments. When you need reliable equipment for your boating needs, trust HeaterCraft.
Heater Kit Includes:
One Heater Unit with wire 6' harness
One High/Low switch
3" Vent hose (6 ft per vent)
One 3" fixed euro vent
One Hot Tube Gen 1
Universal mounting brackets & screws
40 feet of heater hose
One low idle "Y"
2 Brass Fittings with clamps
Technical Specifications:
12 Volt
28,000 BTU
12 V Amperage: Three speed blower Low 4.4, Med 5.8, High 8.5
Air flow: Low 230 cfm, Med 248 cfm, High 260 cfm.
Hose barb: 5/8"
Heater Craft 200 Series - 200 Sport
The 200 series is made in the USA with durable aluminum construction and powder coated for extra protection against marine environments. When you need reliable equipment for your boating needs, trust HeaterCraft.
Heater Kit Includes:
One Heater Unit with wire 6' harness
One High/Low switch
3" Vent hose (6 ft per vent)
One 3" fixed euro vent
One Hot Tube Gen 1
Universal mounting brackets & screws
Technical Specifications:
12 Volt
28,000 BTU
12 V Amperage: Three speed blower Low 4.4, Med 5.8, High 8.5
Air flow: Low 230 cfm, Med 248 cfm, High 260 cfm.
Hose barb: 5/8"
Heater Craft Blower Motor 3-speed 200/500 Single Series 12Volt
Single blower replacement for the 200/500 series heater systems
Replacement Blower: 200/500 heater systems and the 1002H defogger/defroster
Includes: One single blower w/ 10 inch harness
12V Blower (Item # 2-1193 3 speed) - 12V blower, 4.5 amps 260 CFM
NOTE FROM THE FACTORY: If your blower does not match this photo you will need to update your complete heater.
Heater Craft Blower Motor 3-Speed 300/400 Double Series 12Volt
Double Blower replacement for the 300/400 series heater systems
Replacement Blower: 300/400 heater systems
Includes: One double blower w/o harness
12V Blower (Item # 2-1195 3 speed) - 12V blower 6 amps, 320 CFM
NOTE FROM THE FACTORY: If your blower does not match this photo you will need to update your complete heater
Heater Craft Blower Motor 3-Speed 300/400 Double Series 24 Volt
Double Blower replacement for the 300/400 series heater systems
Replacement Blower: 300/400 heater systems
Includes: One double blower w/o harness
24V Blower (Item # 2-8926 3 speed) - 24V blower 4.5 amps, 280 CFM
NOTE FROM THE FACTORY: If your blower does not match this photo you will need to update your complete heater
Heater Craft Blower Motor 3-Speed 200/500 Single Series 24-Volt, 3-Speed
Single blower replacement for the 200/500 series heater systems
Replacement Blower: 200/500 heater systems and the 1002H defogger/defroster
Includes: One single blower w/ 10 inch harness
24V Blower (Item # 2-8000 3 speed) - 24V blower, 3.5 amps 210 CFM
NOTE FROM THE FACTORY: If your blower does not match this photo you will need to update your complete heater.
Heater Craft HEATER CORES 200/500
US made Heater Cores are an all American-made materials in Texas with superior durability, able to withstand even the most extreme temperatures. Built with the highest quality materials and craftsmanship, these heater cores offer reliability and a long service life.
H202
200/500 Series Replacement Tube and Fin Heater Core, 5/8" Hose Barb (2005 or newer).
Replacement Core: For 200 and 500 series heaters
General dimensions: 6.5" W x 10" L x 4" D
Heater Craft MARINE 300 WRAPPER
Our Marine Housings are made from durable USA-made aluminum, providing a reliable and long-lasting housing for your boat. This corrosion-resistant metal is ideal for marine use.
300, updated aluminum housings
Heater Craft Switch Kit
Rotary Switch Kit E112K
Includes:
4 Position Rotary Switch
Backplate
Ring
Switch Knob
Backplate
2 Mounting Screws
4 Female Terminals
Dimensions:
2-1/2" W x 2" H
Heater Craft - FLUSH MOUNT SHOWER SYSTEM - Without switch
The Flush Mount Shower/Wash-down System can be plumbed into your boat in several ways. Use the on-board water system, plumb into the engine's raw water open cooling system or tap a raw water source.
*Specify Kit Below
112SC Kit Includes:
Pump - 12V DC
10 position spray head
Hot and cold water control bar with switch
Mixer hose
6' hot water hose
6' cold water hose
Hose barbs
Hose clamps
Installation Guide
112SCXL Kit Includes:
Pump - 12V DC
10 position spray head
Hot and cold water control bar with switch
Mixer hose
15' hot water hose
6' cold water hose
Hose barbs
Hose clamps
Installation Guide
111SB Kit Includes:
Pump - 12V DC
10 position spray head
Hot and cold water control bar
Mixer hose
Hose barbs
Hose clamps
Installation Guide
