JL Audio M700/5: 5 Ch. Class D Marine System Amplifier, 700 W
5-Channel Class D Marine System Amplifier, 75 W x 4 @ 4 � + 300 W x 1 @ 2 � - 14.4V
The M700/5 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and it fits comfortably in just about any boat's weather-tight compartments. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 �), while also delivering a stout 300 W of power to a subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD�� switching design.
The M700/5 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an HD-RLC remote level control (sold separately), the amplifier's subwoofer channel level or overall level can be directly controlled from a remote location.
This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
Rated Continuous (RMS) Power @ 14.4 V
Main Channels @ 4 � 75 W RMS x 4
Main Channels @ 2 � 100 W RMS x 4
Main Channels - Bridged @ 4� 200 W RMS x 2
Subwoofer Channel @ 4 � 180 W RMS x 1
Subwoofer Channel @ 3 � 240 W RMS x 1
Subwoofer Channel @ 2 � 300 W RMS x 1
Subwoofer Channel @ 1.5 � N/A
Rated Continuous (RMS) Power @ 12.5 V
Main Channels @ 4 � 60 W RMS x 4
Main Channels @ 2 � 90 W RMS x 4
Main Channels - Bridged @ 4� 180 W RMS x 2
Subwoofer Channel @ 4 � 180 W RMS x 1
Subwoofer Channel @ 3 � 240 W RMS x 1
Subwoofer Channel @ 2 � 300 W RMS x 1
Subwoofer Channel @ 1.5 � N/A
Signal Processing
Filter Mode(s): Channels 1 & 2 (front) High-Pass only
Filter Slope(s): Channels 1 & 2 (front) 12 dB/octave
Filter Frequency Range: Channels 1 & 2 (front) 50 Hz - 5 kHz
Filter Mode(s): Channels 3 & 4 (rear) High-Pass or Bandpass
Filter Slope(s): Channels 3 & 4 (rear) 12 dB/octave
Filter Frequency Range: Channels 3 & 4 50 Hz - 500 Hz
Filter Mode(s): Subwoofer Channel Low-Pass only
Filter Slope(s): Subwoofer Channel 12/24 dB/octave
Filter Frequency Range: Subwoofer Channel 50 Hz - 500 Hz
Detented, Calibrated Filter Freq. Potentiometers Yes
Filter Defeat Function Yes
Infrasonic Filter: Subwoofer Channel none
Remote Level Control Optional (HD-RLC)
Remote Level Modes Sub Ch. or All Channels
Channel Input Mode Switch Yes (2/4/6 ch.)
Pass-Through Preamp Output None
Source Channel Selection for PreOuts N/A